Here are the necessary steps to update the drivers involved: But we recommend updating all your outdated drivers. You mainly need USB drivers and the device’s driver. To fix this issue, you need to update the relevant drivers to the latest version. One of the common reasons for the receiver not working is defective driver software. If you could use the receiver previously, you should try unpairing and re-pairing the device using such software. If one doesn’t work, uninstall it before installing another. You should only use one of these programs.Right-click on the installer and select Run as administrator. Install the software while keeping the following points in mind: For most devices, it is the Logitech Unifying Software.īut some devices need the Logitech SetPoint Software or the Logitech Options Software. The software also helps install correct drivers and customize the device settings. Many Logitech receivers need particular software to pair with a compatible device. Reinsert the battery and the power cord and power up your PC.Ĭonnect the Logitech Unifying Receiver and check if you can use your device.Press and hold the power button for 20 seconds to drain the capacitor charge.Unplug your PC’s power cord and, for a laptop, its battery.If they use batteries, take them off as well. Remove the power from the Logitech device as well.Disconnect all peripherals and shut down your PC.The quickest way to resolve them is to perform a power cycle. Sometimes, the Logitech Unifying Receiver won’t work due to minor issues with your PC. If that doesn’t help, seek help from a technician or contact Logitech support. Check if the device works and put everything back together.Check for cable connections and then disconnect and reinsert them if possible.Disconnect the sensor and reconnect it again.If it does, glue or tape stick the cap with the receiver.
0 Comments
Leave a Reply. |